The Gutster™ - Contractors

See the Gutster^™ in Action
Gutster Tips & Tricks
Testimonials
The Gutster^™
      Series I
      Series II
Order Online
Retailers

    Retailer Login
    (Coming Soon!)

Contractors

"I have been in the remodeling business for approximately 30 yrs. I am always willing to try out new tools. When I saw your ad in Remodeling News, I thought someone finally came up with the ideal demo tool. So I ordered two, put them to work and was very impressed with the workability of the tool."
- S. Lydon, Norwood, MA

We all know that time is money... and that the faster you can get demo done, the faster you can get to construction. If you haven't seen the Gutster^™ Demo-Bar in action, take a minute and see it in action now. We know that as soon as you see The Gutster^™ Demo-Bar tearing into roofs, walls, and floors, you'll agree that The Gutster^™ is the only demo tool you'll ever need.

Versatility

Roofing - All Roofing Materials!
Your Gutster^™ Demo-Bar can be used to remove shingles by simply sliding the points under any edge of the shingles. If removing entire roofs, we recommend first cutting the roof between existing rafters with an 8" carbon tip blade from roof ridge to bottom of roof. Then at either end, break roof with the chiseled points of the bar. Find the rafter and center the forks of your Gutster^™ Demo-Bar on it, lift off sections one by one.

Flooring - All Flooring Materials!
Cut wood flooring into 4-foot sections using a 7" skill saw set to the depth of the floor to be removed. Use chiseled points of your Gutster^™ Demo-Bar to begin working up flooring. Slide bar head under loosened floor boards using angled lifter plates to pry flooring, sliding flat bottom of head on surface.

Walls & Ceilings
Using chiseled points, break through sheet rock or wood on walls to locate studs. Using full length of bar chip through ceiling to locate and expose part of beam. Straddle the stud or beam, slide bar along using angled lift plate to pry off material. The Gutster^™ Demo-Bar can be used to straighten and remove rafters and studs. Slide rafter or stud between the forks of the bar and twist into position, or completely twist out.

The Gutster^™ Demo-Bar is not for use on concrete!